제품소개

Gas Insulated Pad mounted Switchgear
Gas Insulated Pad mounted Switchgear

Gas Insulated Pad mounted Switchgear

SF6 Gas Pad Mounted Load Break Switch

All-in-one Design for SCADA system

  • CTs, Voltage Sensors, and Power Transformer (option) are all fitted in the SSPGS.

 This all-in-one SSPGS RMU is easily applicable to DAS or SCADA systems without any extra costs.
Microprocessor-Based Control

  • Combined with CTs and voltage sensors, the RTU can measure electrical quantities and can detect fault information.
  • SF6 gas as an insulating medium eliminates the necessity for periodic oil maintenance.
  • The stainless steel Tank is TIG welded and the other sealing points (bushings, operating shafts, gas filling valve) are sealed with EPDM rubber, so the Tank keeps good gas and water sealing characteristics during its service life.

Robustness and Long Service Life

  • The leakage rate of the SF6 gas from the Tank is less than 2.5 X 10-7 cc/sec, 0.0075% per year,sealed for a lifetime.
  • Gas molecular absorber.
  • Quick close, quick open operator independent spring toggle mechanism.
  • CT shorting device.
  • Safety Membrane bursting at 1.5 kgf/cm2g.
  • The SSPGS experienced a mechanical operation test 5,000 times, and 10,000 times of mechanical operation are guaranteed.
Description SPG-15-6 SPGAS-2
Maximum System Voltage     15 Kv 25.8 kV
Rated Continuous Current  600 A 600 A
Rated Fault Making Current (peak) 52 kAp  32.5 kAp
Electrical Operating Time (Close/Open) 700 ms each 700 ms each
Number of Mechanical Operations (main) 5,000 times 5,000 times
Number of Mechanical Operations (ground) 1,000 times 1,000 times
Short Time Withstand Current (rms)  20 kA (4 sec) 12.5 kA (1sec)
Insulation Level Lightning Impulse Withstand Voltage         95 kV BIL 125 kV BIL
Power Frequency Withstand Voltage 50 kV  60kV
DC Voltage Withstand Voltage 53 kV 78 kV